Kalia plays augmented ney

To start, the follow the steps:

1. Connect Augmented Ney to arduino
2. Connect Arduino to Computer
3. Upload Arduino code to Board
4. Test Serial Port
5. Close Serial Port
6. Check Serial Port ID
7. Open 140504_{InterafacingArduinoofxSimpleSerial}
8. Edit serial.setup("/dev/cu.usbmodemfd121", 9600);
9. Open and start server JackPilot
10. Check out the port that SuperCollider is listening (57120 or 57121))
11. Open REACT_{TheGodArticle} SuperCollider standalone application
12. Open 140324_{TheGodArticle} to test OSC messages
13. Run the folling code to SuperCollider

(
~arduinoData.remove;
~arduinoData = OSCresponderNode(nil, '/arduinoData', { arg time, responder, msg;
    //[time, responder, msg].postln;
	~arduinoArray = msg.asString.split($,).postln;
	NetAddr("127.0.0.1", 12345).sendMsg("/Arduino/Hole1",~arduinoArray[1].asFloat.linlin   (0 , 60, 0.001, 0.999));
	NetAddr("127.0.0.1", 12345).sendMsg("/Arduino/Hole2",~arduinoArray[2].asFloat.linlin(0, 60, 0.001, 0.999));
	NetAddr("127.0.0.1", 12345).sendMsg("/Arduino/Hole3",~arduinoArray[3].asFloat.linlin(0, 60, 0.001, 0.999));
	NetAddr("127.0.0.1", 12345).sendMsg("/Arduino/Hole4",~arduinoArray[4].asFloat.linlin(30, 60, 0.001, 0.999));
	NetAddr("127.0.0.1", 12345).sendMsg("/Arduino/Hole5",~arduinoArray[5].asFloat.linlin(30, 60, 0.001, 0.999));
	NetAddr("127.0.0.1", 12345).sendMsg("/Arduino/Hole6",~arduinoArray[6].asFloat.linlin(0, 35, 0.001, 0.999));
	NetAddr("127.0.0.1", 12345).sendMsg("/Arduino/Hole7",~arduinoArray[7].asFloat.linlin(0, 50, 0.001, 0.999));
	NetAddr("127.0.0.1", 12345).sendMsg("/Arduino/Pressure",~arduinoArray[8].asFloat.linlin(37, 70, 0.001, 0.999));

}).add;
)

1. Open The God ArticleDebug